RETARDER PROOFERS SLOW PROOFING DOUBLE FLOW - CFPL DF RANGE
     

CFPL proofers are designed for bakeries in a slow-proofing bread-making process. The range of CFPL proofers can accommodate 2-18 racks of 400x600 mm (CFPL DF 46 models) or 1-9 racks of 600x800 mm (CFPL DF 68 models).

With its new double flow ventilation system, it ensures a natural and continuous airflow of +2°C to +8°C, over all the products. Even and controlled flow ensures quality proofing while perfectly respecting the dough.


The double flow evaporator

 

  1. Natural and continuous airflow
    The new evaporator in the CFPL DF range has been selected for its gentle power and efficiency.
    The 350 mm diameter centrally located ventilators (1 to 4 on each evaporator), move a large volume of air at extremely low speed.
    No need for a hygrometric system, the humidity rate is naturally regulated.

  2. Double diffusion
    Positioned on the ceiling of the proofer, the ventilation blows from above, thereby respecting the natural direction of air convection.
    The aspiration is done by the ventilator(s) (1 to 4 depending on the model).

  3. Power and modularity
    The exchange surface of the evaporator is greater than that of a conventional intermediate proofer.
    The evaporator is sized to fit into the intermediate proofer in order to obtain optimum performance.
    The expansion valve with external pressure equalization ensures optimum filling of the evaporator, depending on the mass of products present in the intermediate proofer.

 

A hydraulic door closer

The door on the CFPL DF proofer has a new hydraulic closing system.

When the door closes, the jack acts as a shock absorber and call for closing. Once engaged with the striker, it continues to pull the door towards the frame to press against the joint, thus ensuring a perfect airtightness.

The reversible strike and positioning of the door closer situated outside the unit, above the door, require no adjustment and improve the effectiveness of the closure.

A security preventing the confinement has been set up inside the proofer. A simple push on the door opens it.

Reflecting elements indicating the opening are positioned inside the intermediate proofer should the light be extinguished.

 

Quality construction

 

  • The housing consists of panels assembled by eccentric and centring hooks, guaranteeing a flawless finish.
  • The insulating panels are made of 60 mm thick polyurethane foam.
  • The injection is carried out at high pressure ensuring 45kg/m3 density. High pressure has the power to create extremely fine particles, which increases the foam's insulating power.
  • The inner and outer cladding of panels consists of steel sheets dressed with high strength food-safe PVC film
  • R404A ecological cooling system.

 

CFPL retarder proofers are all fitted with:


A precisely sized double flow evaporator
A hydraulic door closer
Automated defrosting using electric heating elements
AC galvanised steel sheets coated with PVC inside and outside
Two protective full-heights on the outside of the door and one inside
Regulation by an temperature sensor

 

Optional

 

Intérieures protection against rack shocks
Energy-saving LED lighting: sealed, IP 65 silicone-coated
15 mm thick floor insulation with reinforced stainless steel ramp


Possibility of adding a conventional intermediate proofer to a slow-raising intermediate proofer.

 




After Sales

The entire equipment we sell is guaranteed one year including labor, with extension available on your request.
Prompts and always available over the phone, don’t hesitate to call us for any information or questions.

Phone : 954 - 440 - 0291